In order to avoid adhesion of the film layers to each other or in a roll anti-blocking additives are used during the production of films; they increase the film’s resistance to blocking (adhesion). These additives may be made from natural or synthetic materials causing different effects and having different fractions; in order to fulfill different client’s needs, a different amount of active material may be used for the production of anti-blocking additives. These additives are widely used in the production of films because of their high effectiveness and their easy incorporation in the production processes of various thickness and transparency films.

Cleaning additives are used for a rapid cleaning of extrusion or casting equipment, when switching from one polymer to another or from one color to another. These additives will save your time and reduce to the minimum the possible emergence of spoilage. The cleaning additives will clean plastic procession and conversion equipment at the lowest cost.

Fire resistance is a compulsory requirement in the contemporary electric power and electronic industry, construction area and transport sector. Most polymers are inflammable. Observing the fire safety rules, polymers must contain flame retardants, which reduce inflammation probability, and also the spread of the flames during the fire; these flame retardants conform to the highest fire resistance requirements and they must be used in the processes of polymer production where these requirements are set. According to the client’s need or specific product requirements we can select the flame retardant which would be the best for the production process or the product itself.

We offer antifogging additives for the manufacturers of plastic packages and greenhouse films. These are modern additives which prevent moisture or vapors accumulation or water drops condensation on the internal surface of the film.

Anti-slip additives create a micro-rough surface and are used in order to prevent several film layers from slipping on each other. This effect may be achieved using anti-slip additives produced from mineral or synthetic materials, depending on specific client’s needs or product requirements

Antistatic additives are the ones that provide antistatic properties to plastic products, i.e. eliminate the static charge typical to all polymers. Thanks to this additive, production process becomes much easier because the surface resistance and dust accumulation are reduced. There may be slow-migration and long acting antistatic additives, which are mainly developed to create an antistatic effect in final product, and fast-migration and short acting antistatic additives, which are developed to be used and to create effect during the production process. Combined antistatic options are also possible; we will select them according to individual clients’ needs or type of product.

Antioxidant additives are recommended for all production processes. During their conversion, production and storage polymers are under the influence of oxygen existing in the environment. For this reason different polymer properties, such as resistance to impact, color, transparency or even fracture length during break, are affected. Antioxidants help stabilizing polymers as well as guarantee heat stability during polymer processing process.

Foaming additives are the ones that give an opportunity to decrease the weight of polymer product to the minimum. In this way the product gains wider and more various application possibilities.

Antibacterial additives are wide spectrum additives, containing antimicrobial or antibacterial ingredients which exterminate different microorganisms, such as: bacteria, mold, yeasts and give long-term antimicrobial effect.

Moisture absorbing additives are an inherent attendant of recycling sector, which makes recycled raw materials suitable for conversion. With the help of these additives it is possible to eliminate moisture from plastic raw materials easily and economically. Once it is eliminated, the polymer is ready for re-processing.

Transparency additives are very effective additives created according to the newest technologies and used for polypropylene transparency. Due to the use of these additives, mechanical properties of the polypropylene will intensify and conversion temperature will increase. These additives also help to improve visual properties of polypropylene increasing transparency and shine

Slip additives are an irreplaceable material that provides lubricity to the films and other products and in this way reduces the coefficient of friction. We may offer slip additives that provide faster or slower, short-term or long-term effect, as well as select additives that are suitable for using in different temperature processes and various technological processes.

Thanks to these new generation additives which were specially developed to be used in production of different qualities products obtained during the same process, the production time will be reduced significantly. According to the client’s task or product requirements we may select the additive that suits to the production process or product best or deliver particular components and combined additives of particular proportions.

There are a few aspects that must be taken into account when it comes to environment friendly plastics. One of them is when additives, due to which plastic decomposes within a short period of time and does not cause long-term pollution, are used during the production. These are so-called biodegradable plastics in the production of which biodegradable additives are used. These additives are new generation additives that are safe for human health, therefore can be used in products that have direct contact with food.

Process stabilizer is an integrate part of modern technologies. They are also called plastic procession optimizers or processing aids. These additives allow achieving better product quality within a shorter processing time and minimum input. Using process stabilizer you will achieve smoother, more even and glossier product surface, because this additive reduces or eliminates superficial product defects (especially in films), and also reduces torque in the extruder, allows processing very viscous polymers, reduces or helps to avoid sedimentation in manufacturing equipment during the process. They also reduce friction between equipment parts in this way reducing electricity demand.

Additives absorbing UV waves provide a very simple way to protect plastic materials from harmful ultraviolet waves, turning them into thermal energy. They are easily used and highly effective in products that are thicker than 100 microns.

Different laboratory researches and long-term practice has shown that additives are necessary for the stabilization of ultraviolet (UV) waves in order to protect the polymers from damage induced by exposure to direct or indirect sunlight. UV stabilizers perfectly neutralize damaging ultraviolet waves, stopping the changes in polymer color, mechanical and physical properties. We offer a wide range of these additives, which may be used both in very thin and thick polymer products.